Transient System
Transient Immunity testing consists of applying various transient pulses to the power supply input or cabling of an EUT. It is used to simulate short-duration, high-amplitude disturbances that can disrupt or destroy electronic circuitry.
Standards that can be provided include:
- EN 61000-3-2, -3-11, -4-4, -4-5, -4-11
- ISO 7637
- Def Stan 59-411 – DCS06
- Def Stan 61-5 Annex B
Equipment and Support
Equipment
Equipment shall be selected by EMC Hire engineers based on the customer's needs, therefore please provide as much information as possible (e.g. applicable standard, test level, test method) when enquiring.
The transient immunity system consists of a transient generator, injection device and monitoring device.
Certain systems also include a laptop with control software, although most can be operated from the front panel of the generator.
All systems are issued with manufacturers' operating instructions or EMC Hire procedures.
Test Support
EMC Hire can provide an Engineer to set up the system at your location if required, or can offer remote assistance via TeamViewer or Teams.
Calibration
The signal level required for the desired test level should be calibrated prior to test.
This calibration can be performed by EMC Hire prior to the hire if required.
System Specification
| Specification | Details |
|---|---|
| System comprises |
Ready to Discuss Your Test Requirement?
Contact EMC Hire's engineering team to discuss your transient testing requirement.
In response to your enquiry via phone or through this website, an engineer will contact you to discuss your requirements. We advise that you download the Test Systems Enquiry Form to expedite the process and ensure that your requirements are fully understood and met.
Complete the form, filling in all of the information you have about your test requirements and Equipment Under Test, and submit it to our team of technical specialists at Support@emchire.co.uk and we will contact you to discuss your requirements and time frames.