EMC Test Guides
EMC Test Guides – Practical Setup & Operation for Hire Systems | EMC Hire
Hands-On EMC Test Setup Guides for On-Site Use
EMC Hire provides a full range of EMC test systems for hire, complete with practical setup guides that show you exactly how to assemble the equipment, connect accessories, and operate the accompanying software.
These guides are designed for engineers who need clear, step-by-step support when running EMC tests at their own facility, without the cost or delay of sending products to an external lab.
Whether you are performing pre-compliance checks, troubleshooting emissions, validating design changes, or carrying out self-declaration compliance tests, our hire systems arrive ready to deploy on-site with straightforward instructions that help you get up and running quickly and confidently.
Radiated Emissions Setup Guide
Our radiated emissions setup guide walks you through assembling antennas, pre-amplifiers, turntables, and spectrum analysers into a functional test environment at your location. It explains how to position the antenna, route cables, configure the analyser, and run the measurement software so you can capture emissions data efficiently. This guide is ideal for engineers performing radiated emissions scans in workshops, temporary test areas, or semi-anechoic chambers using EMC Hire’s portable, calibrated equipment. Schematics
Conducted Emissions Setup Guide
This guide shows you how to connect LISNs, ISNs, CDNs, and analysers to create a clean, repeatable conducted emissions test setup on your bench. It covers correct grounding, cable layout, analyser configuration, and software operation so you can quickly identify noise on mains or signal lines. Designed for on-site use, it helps you get the most from EMC Hire’s conducted emissions test system's without needing a full compliance lab. Schematics
Radiated Immunity Setup Guide
Our radiated immunity setup guide explains how to assemble antennas, power amplifiers, field probes, and signal generators into a working RF immunity test system at your facility. It covers amplifier connections, probe placement, software calibration routines, and how to run automated sweeps. This guide is ideal for customers hiring portable radiated immunity systems to perform on-site robustness checks or pre-compliance immunity testing. Schematics
Conducted Immunity Setup Guide
This guide details how to configure CDNs, EM clamps, power amplifiers, and signal sources for a complete conducted immunity test setup. It shows you how to connect the injection hardware, run calibration procedures, and operate the immunity software to apply controlled RF disturbances to your cables. EMC Hire’s conducted immunity hire systems are designed for easy deployment at your premises, and this guide ensures you can get them running quickly. Schematics
ESD Test Setup Guide
Our ESD setup guide explains how to prepare the test area, position the coupling planes, configure the ESD gun, and run discharge sequences using the supplied accessories. It focuses on practical, on-site operation so you can perform ESD testing directly on your bench or in your workspace using EMC Hire’s hire-ready ESD equipment. Schematics
EFT/Burst Test Setup Guide
This guide shows you how to connect burst generators, coupling clamps, and line networks to create a functional EFT test setup at your location. It covers generator configuration, cable routing, grounding, and software operation so you can run burst sequences safely and consistently using EMC Hire’s portable EFT hire systems. Schematics
Surge Test Setup Guide
Our surge setup guide walks you through connecting surge generators, coupling networks, and protective accessories to perform surge testing on site. It explains generator settings, coupling options, and software control so you can run surge tests safely and effectively using EMC Hire’s hire equipment without needing a dedicated lab. Schematics
Harmonics & Flicker Setup Guide
This guide explains how to connect power analysers, flicker meters, and reference impedance networks to create a harmonics and flicker test setup at your facility. It covers warm-up, loading, analyser configuration, and software operation so you can capture accurate power quality data using EMC Hire’s hire ready systems. Schematics
Pre Compliance EMC Setup Guide
Our pre compliance setup guide helps you assemble near field probes, antennas, analysers, GTEM cells, and portable immunity tools into a flexible on site test environment. It focuses on quick deployment, fast scanning, and efficient software operation so you can diagnose EMC issues early using EMC Hire’s compact, easy to use hire systems. Schematics
Why Use EMC Hire’s On Site EMC Test Systems?
- All systems available for hire and delivered directly to your location.
- Calibrated, ready to use equipment with clear setup and software guides.
- Ideal for in house testing, troubleshooting, and pre compliance checks.
- No need for a full EMC lab — create a functional test setup in your own workspace.
- Optional consultancy services available separately for standards interpretation and compliance strategy.
EMC Hire gives you the tools and guidance to run EMC tests where you need them, when you need them.
Ready to Get Started?
Run EMC tests on site with confidence using EMC Hire systems