The EMCO 6507 is a 30cm loop, this loop can be utilised for H-Field emissions.

Where would this be used? The EMCO 6507 can be used for Radiated Emissions to measure the emissions being produced by the EUT.

The antenna is powered by two 6-volt rechargeable sealed lead-acid batteries, providing around eight hours of operation after an eight-hour recharge using the supplied charger. Designed for use with most 50-ohm input receivers, it includes a built-in 10 dB RF pre-amplifier. Typical sensitivity is 11 dBµA/m at 10 kHz and −29 dBµA/m at 1 MHz (200 Hz bandwidth, average detector). An overload LED indicates when the input signal exceeds 10 V/m and can be monitored remotely via an adaptor.