The EMCO 2065 is an Automatic Turntable. It is 1.2m (4ft) in diameter and stands just 50mm above floor surface. 

Its power unit is identical to the mast motor, requiring a 13 A outlet to supply power to a 0.1 hp induction motor. The unit is fibre-optically coupled to the 2090 controller via a 20-metre fibre-optic cable. The turntable is constructed from high-quality plywood and finished with a durable laminate, making it suitable for both chamber and outdoor use. The mechanical drive between the table and the motor can be customised to suit your facility. A flexible hose connects to a 1-inch diameter fibreglass rod, which then interfaces with the turntable via a second hose acting as a universal joint. Rod lengths are available in 0.5m, 1 m, 1.5m, and 2.0m options.

The turntable requires either Item 824, the EMCO 2090 GPIB Mast/Turntable Controller with its 20-metre fibre-optic leads, or Item 828, the EMCO 399054 Hand-Held Controller. The controller provides degree-by-degree rotational readout.

*Distributed Load Rating - It can withstand 273kg (600lbs) distributed load.