Skip to content
Logo
During Radiated Immunity (RI) testing, RF energy will be transmitted at the Equipment Under Test (EUT) in order to confirm that the levels do not degrade its performance or cause deviations from the specifications of the EUT. Electric Field Radiated Immunity testing must be performed in a shielded enclosure, therefore the testing should be performed in an EMC chamber or alternatively inside a GTEM (for pre-compliance testing.). A Radiated Immunity system is included along with a signal generator, amplifier(s), coupler(s), power meter & probe, measurement field probe, GTEM (If applicable), as well as interconnecting cables with terminations suited to the devices provided. EMC Hire engineers will select equipment based on the customer's needs, so please provide as much information as possible (e.g. applicable standard, test level, etc.). The measurement field probe will be placed inside the EMC chamber or GTEM for initial calibration of the system. The required power is stored within the RadiMation software which will then be played back to test your EUT for susceptibility. A laptop containing RadiMation test software is included in the system, which will be preloaded with the appropriate test configurations including factors. A software operating procedure is also included to guide you through using the software as well as setup photos to help you assemble the equipment. We invite you to visit our facility for a demonstration and training, or EMC Hire can provide an engineer to set up the system at your location if necessary, or provide remote assistance via Teamviewer or Teams.

We use cookies to improve your experience and analyze traffic. See our Privacy Policy .