Harmonics / Flicker System

During Harmonics and Flicker testing, the mains supply of the Equipment Under Test (EUT) is connected to the power analyser and low distortion power source in order to confirm that the harmonic and flicker performance is within the specifications limits. A power analyser is included along with a low distortion power source. EMC Hire engineers will select equipment based on the customer's needs, so please provide as much information as possible (e.g. mains voltage & current of the EUT). The mains supply is connected through the low distortion power source to the power analyser input. The output is then connected to the EUT mains input, which will then measure the harmonics and flicker to the applicable levels. A laptop containing test software is included in the system. We invite you to visit our facility for a demonstration and training, or EMC Hire can provide an engineer to set up the system at your location if necessary, or provide remote assistance via Teamviewer or Teams.

Added to your quote.

Item Number

953

Category

Regulation 10

Test Mode

Immunity

Test Type

System

Manufacturer

EMC Hire

General Specification

The specification of the test equipment for this group is tailored around the customer's requirement.

Frequency ranges and test levels vary depending on the standard applied, our engineers will advise on the best equipment to meet your requirements.

The table below shows some of the available options for theHarmonics & Flicker systems. Include the option number in your enquiry to aid in the item selection.

Option No.

Test Method

Applications

EN 61000-3-2

Low Voltage AC Mains (4.4 A Max)

EN 61000-3-3

Low Voltage AC Mains (4.4 A Max)

In response to your enquiry via phone or through this website, an engineer will contact you to discuss your requirements. We advise that you download the below Test Systems Enquiry Form to expedite the process and ensure that your requirements are fully understood and met.

Option No.	Test Method	Applications
#1	EN 61000-3-2	Low Voltage AC Mains (4.4 A Max)
#2	EN 61000-3-3	Low Voltage AC Mains (4.4 A Max)